Bosch Jigsaw 1581 Vs Manualidades

There is a round hole in the center of the front handle that allows you to use a long narrow flat head screwdriver to loosen the slotted screw that locks the blade in place. Then you can turn the blade 90 degrees and remove it, replace it, and reverse the process. You need the right kind of screwdriver, one with a blade about 3/16' wide and a quite long stem before the handle, so you can reach the screw. See also I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.

If I've managed to answer your question or solve a problem, please take just a moment to rate this post.thanks! Posted on Aug 02, 2011. I am assuming you are asking because you have a CLIC system. Bosch uses a tool-less blade changing system for its jigsaws that it calls 'Clic.' The system makes changing blades fast and simple.

With the simple blade changing you get with the Bosch jigsaws, it is no problem to change out a dull blade. REMEMBER: SAFETY FIRST LAST AND ALWAYS Download Picmix Di Nokia E63. !!!

Make sure the saw is unplugged or the battery is removed. If you have a blade in there: Hold the saw over a work bench and push the ejector lever to the center of the front of the saw.

There is a center stop; you will feel it. The blade will eject and fall out Insert the new saw blade into the plunger until it latches into place. The teeth should face toward the front of the saw. The back of the blade should rest in the groove of the guide roller. The plunger and the guide roller are between the body of the saw and the plate If the blade will not go into the plunger, check the positioning of the slots in the blade.

They should be at the top. Push the ejector lever and try again. Serial Audials One 11 License.

Give the blade a yank to check that it is firmly seated. Plug the saw back in or replace the battery and proceed with the cut Use protective gloves when handling blades. They can be sharp and can be HOT. I hope this helps Please rate FIXYA Thanks Charly May 20, 2011 .

Hi all - Just found a deal near me for an old Bosch jig saw 1581vs. From what I can tell from googling - this is a pretty old tool (late 80s / early 90s) - but I get the sense that it was pretty well respected in its time. The saw is on sale for just $20 - so seems like a good deal. What I'm trying to figure out - should I get this saw or am I better off going with a newer, cheap model like the Black and Decker 5 amp jig saw you can get brand new on Amazon for $30? Any advice is much appreciated.

BOSCH 1581VS Jig Saw X. BOSCH 1581VS Jig Saw Manufacturer: Bosch Power. Bosch Power Tools SKU: 76-040. Find great deals on eBay for Bosch 1581VS Jig Saw and bosch 1581 jigsaw. Shop with confidence.